Software updates

Tekla License Service update April 2020 (v3.01.0000)

Tekla Online Licensing [TEDDS-4367]1 Fixed Tekla Tedds for Word failing to start and hanging on the Microsoft Word splash screen if the existing Trimble identity login details were greater than 14 hours old. [TEDDS-4367]1 Fixed all applications losing active license after 14 hours due to Trimble Identity login details not being refreshed before they expire. [TSD-6732]1 Fixed the Automatic license method not working for all applications. [TSD-6707]1 Fixed Tekla Portal Frame Designer not allowing integrated connection design when using a Tekla Online License. Improved the user experience when
by Tedds Development Team
0

Tekla Tedds Engineering Library (April 2020)

ContentsUK and AsiaUSAAustraliaCanadaEurope Back to topUK and Asia Precast concrete grouted sleeve splice design (EN1992) New calculation which checks the design of a precast grouted sleeve splice connection. A column to column, column to foundation or beam to column joint can be defined. In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values. Crane gantry girder design (EN1993) Enhanced to allow for designs using flat bar rails. Output enhanced to include the results for the factored and
by Martin Roclawski
0

Tekla Tedds Engineering Library (December 2019)

Important Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later. Contents UK and Asia USA Australia Canada Europe Back to top UK and Asia Updates 2D analysis - Member wizard [TEDDS-4081]1 Enhanced to include an option to rotate the support conditions with the local member axis. RC column design (EN1992) Enhanced to improve calculation performance. [TEDDS-3999]1 Fixed error related to incorrect link spacing shown in sketch. Timber rafter design (EN1995) [TEDDS-4076]1 Added option to horizontally restrain the rafters top support. Back to top
by Tedds Development Team
0

Tekla Tedds Engineering Library (November 2019)

Important Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later. Contents UK and Asia USA Australia Canada Europe Back to top UK and Asia Masonry bearing design (EN1996) Masonry bearing design (BS5628) Masonry wall panel design (EN1996) Masonry wall panel design (BS5628) Enhanced to include Wienerberger's new 500 series Porotherm block range. Other updates Retaining wall analysis & design (BS8002) [TEDDS-764, TEDDS-786]1 Amended preview results displayed for masonry wall stems. [TEDDS-782]1 Corrected bug related to available
by Martin Roclawski
5

Tekla Tedds Engineering Library (October 2019)

Important Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later. Contents UK and Asia USA Australia Canada Europe Back to top UK and Asia Crane gantry girder design (EN1993) New calculation which checks the design of a simply supported gantry girder comprising of either a plain I section, an I section with a capping plate or an I section with a capping channel, carrying a conventional overhead or an underslung travelling crane. In accordance with EN1993 and the national annex for the UK, Singapore, Finland, Sweden, Norway or the recommended
by Tedds Development Team
0

Tekla Tedds Engineering Library (September 2019)

Important Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later. Contents UK and Asia USA Australia Canada Europe Back to top UK and Asia Steel member analysis & design (EN1993) Enhanced user experience to simplify the design of single beams or columns, with improved calculation performance and optimisations which allow designs to be completed more quickly than previously. Batch design Enhanced to include numerous benefits including: New output option to send the output to the Tedds Application, a project will be created and each design will
by Tedds Development Team
0

Tekla Tedds 2019 - Service Pack 3

Important If you are running a 64-bit version of Windows you will require both updates. Service Pack 3 is required to use the Tedds Engineering Library (September 2019) or later. General [TEDDS-3308]1 Fixed the Contact Support command requiring a Tekla Structures maintenance license in order to submit a support case via the Tekla Support Tool. 2D analysis [TEDDS-3709]1 Fixed result diagrams in the user interface and output showing the text for some results upside down after installing Service Pack 2. [TEDDS-3691]1 Minor amendments to the user interface to ensure controls are
by Tedds Development Team
0

Tekla Tedds Engineering Library (July 2019)

Important Service Pack 2 is required to use the Tedds Engineering Library (July 2019) or later. Contents UK and Asia USA Australia Canada Europe UK and Asia Updates Column base plate design (EN1993) [TEDDS-3210]1 Added to output derivation of Ft,Rd RC beam analysis & design (EN1992) RC beam design (EN1992) Refactoring code for integration with other calculations. [TEDDS-1017]1 - fixed the use of an incorrect lever arm when previous load has been removed in the design only calculation. [TEDDS-1648]1 - Enhanced the calculation to include the option to select a user defined
by Tedds Development Team
0

Tekla Tedds 2019 - Service Pack 2

Important If you are running a 64-bit version of Windows you will require both updates. Service Pack 2 is required to use the Tedds Engineering Library (July 2019) or later. General [TEDDS-3592]1 Fixed Tedds for Word and the Tedds application when showing the progress log window to ensure that the window is always brought to the foreground. [TEDDS-3574]1 Fixed parsing errors related to Rich Text Format calc library items which have been edited using a word processor other than Microsoft Word. [TEDDS-3641]1 Updated use of Trimble identity in preparation for when servers switch to using TLS
by Tedds Development Team
0

Tekla Tedds Engineering Library (June 2019)

Contents UK and Asia USA Australia Canada Europe UK and Asia Updates 2D analysis [TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1. [TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties. Updated output to increase accuracy of values in sections table to 1 decimal place. [TEDDS-3517]1 Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber. Frame wizard [TEDDS-3467]1
by Martin Roclawski
0

Tekla Tedds 2019 - Service Pack 1

Important If you are running a 64-bit version of Windows you will require both updates. General [TEDDS-3459]1 Enhanced calculation performance, reducing the calculation time by up to 50%, depending on the calculation. [TEDDS-3149]1 Tekla Support Tool - Updated the message prompt for 'Save document before sending' to include the option to cancel. [TEDDS-3208]1 Fixed the Tedds Setup Wizard not showing the full text of some labels in the user interface. [TEDDS-3409]1 Enhanced the 2D analysis solver so that density values are automatically factored by g_{acc} when using the US locale so that
by Tedds Development Team
0

Tekla Tedds Engineering Library (May 2019)

Contents UK and Asia USA Australia Canada Europe UK and Asia Updates Retaining wall analysis & design (EN1992/EN1996/EN1997) [TEDDS-847]1 - Corrected calculation of inclined load factor, ic, for undrained soils. [TEDDS-3145]1 - Pass/fail sketch in interface corrected for masonry stem design. [TEDDS-3157]1 - Amended UI to ensure partial factor, γc, retains correct value when the calculation is rerun. [TEDDS-3332]1 - Corrected calculation of maximum friction force in output when net pressure is not selected. Rolling load analysis [TEDDS-3427]1 Enhanced to include the materials
by Tedds Development Team
0

Tekla Tedds Engineering Library (April 2019)

Contents UK and Asia USA Australia Canada Europe UK and Asia Steel member fire resistance design (EN1993) New calculation which checks the capacity of a single steel member subject to bending to maintain its required mechanical resistance in case of fire during the required time of exposure. The member being designed may be unprotected (bare steel) or protected and may be supporting a composite or concrete slab, i.e. the member is only exposed on three sides. In accordance with EN1993 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Sweden, Norway or the recommended
by Tedds Development Team
0

Tekla Tedds Engineering Library (January 2019)

UK and Asia Updates Foundation analysis & design (EN1992/EN1997) Corrected error calculating sliding resistance in foundations where there is net uplift under one of the load combinations. Gabion retaining wall analysis & design (EN1997) Added video demonstration to calculation notes. Masonry column design (EN1996) Added video demonstration to calculation notes. Timber frame racking panel design (EN1995) Added video demonstration to calculation notes. USA No Updates Australia Seismic loading (AS1170) [TEDDS-2792]1 Corrected calculation of Ch(T) from Table 6.4 for the
by Tedds Development Team
2.5

Tekla Tedds Engineering Library (December 2018)

Contents UK and Asia USA Australia Canada Europe UK and Asia Column base plate design (EN1993) Masonry column design (EN1996) RC wall design (EN1992) Enhanced output options including a summary table showing the key results which allows anyone reviewing the output to quickly determine the overall status of the design. A user defined note can also be included in the output to add information which is relevant to the specific design case. Other updates Column base plate design (EN1993) [TEDDS-2963]1 Fixed "specified result units do not match dimensions of expression" error when
Requires Tekla Maintenance
by Tedds Development Team
5

Tekla Tedds Engineering Library (November 2018)

Contents UK and Asia USA Australia Canada Europe UK and Asia RC column design (EN1992) You can now benefit from enhanced output options including a summary table showing the key results which allows anyone reviewing your output to quickly determine the overall status of the design. You can also now define a note which will be included in the output for adding any additional information which is relevant to the specific design case. Product bulletin October 2018 (PBT-1810-4) [TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations
by Tedds Development Team
5

Tekla Tedds 2018 - Service Pack 4

Updated - Service Pack 4a [TEDDS-854, TEDDS-856, TEDDS-858] Fixed a problem introduced in the first release of Service Pack 4 which caused Tedds for Word to crash when using dialog's which include access to the help system, for example the Options dialog and the Insert Calc Section dialog. Important If you are running a 64-bit version of Windows you will require both updates. Tedds 2018 - Service Pack 3 Library Access System [TEDDS-597]1 Calc Items can now be moved easily from one library to another. When using the Edit Item Properties dialog you can now modify the library property
by Martin Roclawski
5

Tekla Tedds Engineering Library (October 2018)

Contents UK and Asia USA Australia Canada Europe UK and Asia Gabion retaining wall analysis & design (EN1997) Pile analysis (EN1997) RC stair design (EN1992) Steel sheet piling design (EN1997) Timber connection design (EN1995) Timber frame racking panel design (EN1995) Enhanced output to include an optional summary table showing key results and an optional user defined note. RC slab design (EN1992) Enhanced user interface for an improved user experience. The output has also been enhanced to include an optional summary table showing key results and an optional user defined
by Martin Roclawski
1

Tekla Tedds Engineering Library (September 2018)

Contents UK and Asia USA Australia Canada Europe UK and Asia Timber member analysis & design (EN1995) Timber 2D analysis & design (EN1995) New Timber member analysis & design calculations which are fully integrated with the 2D analysis calculation. The calculations check the design of solid timber, flitch, glulam and LVL members subject to major axis bending, shear and axial tension or compression. The design checks are in accordance with EN1995 and the national annex for the UK, Ireland, Finland, Norway, Sweden or the recommended Eurocode values. The 'Timber member
by Tedds Development Team
0

Tekla Tedds 2018 - Service Pack 3

Important If you are running a 64-bit version of Windows you will require both updates. Tedds 2018 - Service Pack 3 Steel/Timber Beam analysis & Design [TEDDS-313]1 - Fixed grid columns in beam analysis user interface being too narrow when windows text size setting is greater than 100%. [TEDDS-334]1 - Fixed error "Failed to create drawing metafile" if Calibri font does not exist on computer. 2D analysis [TEDDS-143]1 - Fixed unhandled exception when opening the combination generator when Windows text size setting is greater than 100%. [TEDDS-191]1 - Fixed "Null reference" exception
by Tedds Development Team
0

Pages