Hello!

Did you know that logged in users can see a lot more content?

Tekla Tedds Engineering Library (November 2018)

Last updated November 16, 2018 by Tedds Development Team tekla-product-development-tedds-team-ug@trimble.com

Tekla Tedds Engineering Library (November 2018)

Contents

UK and Asia

RC column design (EN1992)

You can now benefit from enhanced output options including a summary table showing the key results which allows anyone reviewing your output to quickly determine the overall status of the design. You can also now define a note which will be included in the output for adding any additional information which is relevant to the specific design case.

Product bulletin October 2018 (PBT-1810-4)

[TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations with more than 9 'other element' lateral elements. For more detailed information please refer to “Product bulletin October 2018 (PBT-1810-4)” in the Bulletins group of the Engineering Library Index.

Product bulletin November 2018 (PBT-1811-2)

[TEDDS-958]1 RC beam analysis & design (EN1992), RC 2D analysis & design (EN1992) - Fixed the design button to disable and invalidate the calculation if an inverted T or L is selected in the 2D analysis interface page. For more detailed information please refer to “Product bulletin November 2018 (PBT-1811-2)” in the Bulletins group of the Engineering Library Index.

Other updates

Bearing pressures for rectangular footings
Corrected calculation of base pressures with two corners bearing and reaction extremely close to edge of base.

Column base plate design (EN1993)

Added video demonstration to calculation notes.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1026]1 Corrected 'Undefined variable' error associated with new calculations.

RC beam analysis & design (EN1992)

[TEDDS-959]1 - Enhanced the reinforcement dialog to include a preview results check box.

RC column design (EN1992)

Enhanced the calculation to support automation when _CalcUI is set to -1.

RC slab design (EN1992)

Added video demonstration to calculation notes.

RC wall design (EN1992)

Added video demonstration to calculation notes.

Retaining wall analysis & design (EN1992/EN1996/EN1997)

[TEDDS 301]1 - Fixed divide by zero error associated with retained soil being entirely saturated.
[TEDDS 504]1 - Enabled 'Foundations are drained' option when 'Calculate net ultimate bearing capacity' option is disabled, previously this option was being hidden in error.

Timber beam analysis & design (EN1995)

Corrected error associated with old calculations with 'user defined' timber not being able to reselect a timber grade from the timber datalist.

USA

Product bulletin October 2018 (PBT-1810-4)

[TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations with more than 9 'other element' lateral elements. For more detailed information please refer to “Product bulletin October 2018 (PBT-1810-4)” in the Bulletins group of the Engineering Library Index.

Product bulletin November 2018 (PBT-1811-1)

[TEDDS-958]1 Steel member design (AISC360), Steel member analysis & design (AISC360), Steel 2D analysis & design (AISC360), Steel beam analysis & design (AISC360) - Fixed a potentially un-conservative error affecting the design of some square and rectangular HSS sections with slender webs under compression. For more detailed information please refer to “Product bulletin November 2018 (PBT-1811-1)” in the Bulletins group of the Engineering Library Index.

Product bulletin November 2018 (PBT-1811-2)

[TEDDS-958]1 RC beam analysis & design (ACI318), RC 2D analysis & design (ACI318) - Fixed the design button to disable and invalidate the calculation if an inverted T or L is selected in the 2D analysis interface page. For more detailed information please refer to “Product bulletin November 2018 (PBT-1811-2)” in the Bulletins group of the Engineering Library Index.

Other updates

Bearing pressures for rectangular footings

Corrected calculation of base pressures with two corners bearing and reaction extremely close to edge of base.

Wind loading (ASCE7)

[TEDDS-1279]1 - Fixed an error where the wall zones could not be manually added/edited for components and cladding load cases.
[TEDDS 1277]1 - Added minimum roof and wall pressures to output

Australia

Product bulletin October 2018 (PBT-1810-4)

[TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations with more than 9 'other element' lateral elements. For more detailed information please refer to “Product bulletin October 2018 (PBT-1810-4)” in the Bulletins group of the Engineering Library Index.

Product bulletin November 2018 (PBT-1811-2)

[TEDDS-958]1 RC beam analysis & design (AS3600), RC 2D analysis & design (AS3600) - Fixed the design button to disable and invalidate the calculation if an inverted T or L is selected in the 2D analysis interface page. For more detailed information please refer to “Product bulletin November 2018 (PBT-1811-2)” in the Bulletins group of the Engineering Library Index.

Other updates

Bearing pressures for rectangular footings

Corrected calculation of base pressures with two corners bearing and reaction extremely close to edge of base.

Canada

Product bulletin October 2018 (PBT-1810-4)

[TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations with more than 9 'other element' lateral elements. For more detailed information please refer to “Product bulletin October 2018 (PBT-1810-4)” in the Bulletins group of the Engineering Library Index.

Updates

Bearing pressures for rectangular footings

Corrected calculation of base pressures with two corners bearing and reaction extremely close to edge of base.

Europe

2D analysis
Beam analysis
Steel 2D/member analysis & design (EN1993)
RC 2D/beam analysis & design (EN1992)
Timber 2D/member analysis & design (EN1995)

If you are designing in Finland, Norway or Sweden you can now benefit from an enhanced load combination generator. Load combinations are created automatically in accordance with the selected National Annex thus saving you from the time and effort of having to manually define each load combination.

RC column design (EN1992)

You can now benefit from enhanced output options including a summary table showing the key results which allows anyone reviewing your output to quickly determine the overall status of the design. You can also now define a note which will be included in the output for adding any additional information which is relevant to the specific design case.

Product bulletin October 2018 (PBT-1810-4)

[TEDDS-855]1 Rigid diaphragm force distribution - Fixed a potentially un-conservative error affecting calculations with more than 9 'other element' lateral elements. For more detailed information please refer to “Product bulletin October 2018 (PBT-1810-4)” in the Bulletins group of the Engineering Library Index.

Product bulletin November 2018 (PBT-1811-2)

[TEDDS-958]1 RC beam analysis & design (EN1992), RC 2D analysis & design (EN1992) - Fixed the design button to disable and invalidate the calculation if an inverted T or L is selected in the 2D analysis interface page. For more detailed information please refer to “Product bulletin November 2018 (PBT-1811-2)” in the Bulletins group of the Engineering Library Index.

Other updates

Bearing pressures for rectangular footings
Corrected calculation of base pressures with two corners bearing and reaction extremely close to edge of base.

Column base plate design (EN1993)

Added video demonstration to calculation notes.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1026]1 Corrected 'Undefined variable' error associated with new calculations.

RC beam analysis & design (EN1992)

[TEDDS-959]1 - Enhanced the reinforcement dialog to include a preview results check box.

RC column design (EN1992)

Enhanced the calculation to support automation when _CalcUI is set to -1.

RC slab design (EN1992)

Added video demonstration to calculation notes.

RC wall design (EN1992)

Added video demonstration to calculation notes.

Retaining wall analysis & design (EN1992/EN1996/EN1997)

[TEDDS 301]1 - Fixed divide by zero error associated with retained soil being entirely saturated.
[TEDDS 504]1 - Enabled 'Foundations are drained' option when 'Calculate net ultimate bearing capacity' option is disabled, previously this option was being hidden in error.

Timber beam analysis & design (EN1995)

Corrected error associated with old calculations with 'user defined' timber not being able to reselect a timber grade from the timber datalist.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Content rating: 
Average page rating: 5 (1 vote)
Refresh page after voting to show updated result.