Tekla Tedds Engineering Library (June 2019)

Last updated June 20, 2019 by Martin Roclawski martin.roclawski@trimble.com

Tekla Tedds Engineering Library (June 2019)

Contents

UK and Asia

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place. [TEDDS-3517]1 Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1960]1 Amended calculation to allow users to set punching shear stress factor, b.
[TEDDS-3403]1 Added check box to allow design preview results to be disabled.
[TEDDS-3470]1 Made minor adjustments to output of plain concrete foundations.

Reinforcement schedule (BS8666)

[TEDDS-1280]1 - Adjusted minimum length of dimension B for shape code 29.

Steel beam analysis & design (EN1993)

[TEDDS-1512]1 Steel member design calculation superseded.
[TEDDS-820]1 Corrected the calculation of the design bending resistance moment for Slimflor beams.
[TEDDS-3272]1 Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design (EN1993)
Steel member design (EN1993)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-3113]1 - Corrected issue related to columns in 2D analysis models.
[TEDDS-1491]1 - Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
[TEDDS-1473]1 - Changed default steel grade to 'S355'.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

USA

Masonry wall panel design (TMS/MSJC)
Masonry lintel analysis & design (TMS/MSJC)
Masonry lintel design (TMS/MSJC)

Enhanced design in accordance with TMS 402/602-16.

Other updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-490]1 Updated for US design to use NDS data lists rather than data tables.
[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-490]1 Updated for US design to use NDS data lists rather than data tables.
[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design (AISC360)
Steel member design (AISC360)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Wood ledger design (NDS)

[TEDDS-926]1 Corrected ASD load combination number 4 in ASCE7-10.

Australia

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Steel member analysis & design (AS4100)
Steel member design (AS4100)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Canada

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Europe

Updates

2D analysis

[TEDDS-3469]1 Updated definitions for steel section data list calc items to include name of Area property in-line with enhancements in Tedds 2019 Service Pack 1.
[TEDDS-3468]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
Updated output to increase accuracy of values in sections table to 1 decimal place. [TEDDS-3517]1 Amended Eurocode combinations for combination generator to omit 'Quasi' combinations when material is timber.

Frame wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.

Truss wizard

[TEDDS-3467]1 Enhanced to allow a custom section data list to be defined for selecting the section properties.
[TEDDS-3553]1 Fixed input controls for internal section always being disabled when TrussType is "Common" even if internal sections are required.

Foundation analysis & design (EN1992/EN1997)

[TEDDS-1960]1 Amended calculation to allow users to set punching shear stress factor, b.
[TEDDS-3403]1 Added check box to allow design preview results to be disabled.
[TEDDS-3470]1 Made minor adjustments to output of plain concrete foundations.

Steel beam analysis & design (EN1993)

[TEDDS-1512]1 Steel member design calculation superseded.
[TEDDS-820]1 Corrected the calculation of the design bending resistance moment for Slimflor beams.
[TEDDS-3272]1 Corrected the effective length factors used when loads are classified as destabilising.

Steel member analysis & design (EN1993)
Steel member design (EN1993)

[TEDDS-3130]1 - Corrected output summary tables for calculations with multiple design sections.
[TEDDS-3113]1 - Corrected issue related to columns in 2D analysis models.
[TEDDS-1491]1 - Amended calculation to automatically assign an appropriate steel grade when switching between HC or HR and other section types.
[TEDDS-1473]1 - Changed default steel grade to 'S355'.
[TEDDS-315]1 - Changed calculation to use 'creator' method to set up initial analysis model.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Content rating: 
No votes yet