Tekla Tedds Engineering Library (April 2020)

Tekla Tedds
2020
Tekla Tedds Tekla Tedds for Word
Environment
Australia
British Standard
Canada
Eurocode
USA
Materials
Concrete
Steel

Back to top

UK and Asia

Precast concrete grouted sleeve splice design (EN1992)

New calculation which checks the design of a precast grouted sleeve splice connection. A column to column, column to foundation or beam to column joint can be defined. In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Crane gantry girder design (EN1993)

Enhanced to allow for designs using flat bar rails. Output enhanced to include the results for the factored and unfactored end reactions.

Other updates

Batch design

Enhanced to include an example for "Precast concrete grouted sleeve splice design (EN1992)".
[TEDDS-4440]1 Enhanced to include an option for showing a message box prompt when either each design has finished or the entire batch design has finished. While the message window is open it is possible to view the contents of the Tedds progress log window.
[TEDDS-4441]1 Enhanced to include an option to run any list of expressions before the input for each row is assigned so that other variables or functions can be used to setup each design case.
Moved the less frequently used options under the heading "Advanced Options" so that first time users are not overwhelmed by the options available.

RC beam design (EN1992)
RC 2D/beam analysis & design (EN1992)

[TEDDS-3849]1 - Fixed reinforcement sketch for cantilever and short span cases.
[TEDDS-4283]1 - Fixed interface layout issue when the crack width check turned off and the calculation is rerun.

RC column design (EN1992)

[TEDDS-3832]1 Enhanced to include check for shear resistance of the section without shear reinforcement.

RC slab design (EN1992)

[TEDDS-309]1 Fixed undefined variable error when rerunning calculation and clicking on the support reinforcement dialog.

Steel member design (EN1993)
Steel 2D/member analysis & design (EN1993)

[TEDDS-4403]1 - Corrected undefined variable 'Ix' error associated with changing selected section in design interface.

Back to top

USA

Updates

Batch design

[TEDDS-4276]1 Fixed batch design spread sheets for Wood member design (NDS) to fix undefined variable error '_DList'
[TEDDS-4440]1 Enhanced to include an option for showing a message box prompt when either each design has finished or the entire batch design has finished. While the message window is open it is possible to view the contents of the Tedds progress log window.
[TEDDS-4441]1 Enhanced to include an option to run any list of expressions before the input for each row is assigned so that other variables or functions can be used to setup each design case.
Moved the less frequently used options under the heading "Advanced Options" so that first time users are not overwhelmed by the options available.

RC 2D/beam analysis & design (ACI318)
RC beam design (ACI318)

[TEDDS-599]1 - Enhanced to include an option to convert the single beam model to a 2D model.
[TEDDS-3717/3897]1 - Improved the 2D analysis validation message when a model has beams in that are beyond scope of the calculation.

RC shear wall design (ACI318)

[TEDDS-4379]1 Fixed minor error with drawing.

Seismic forces (ASCE7)

[TEDDS-4404]1 - DataTable "ASCE7-16_12-2-1.tbl", fixed value for heading "Table" to reference the correct design code version, "ASCE7-16..."

Steel member analysis & design (AISC360)

[TEDDS-4341]1 - Corrected the unrestrained length used in the output of the flexure checks.

Back to top

Australia

Retaining wall analysis & design (AS4678/AS3600/AS3700)
RC beam deflection (AS3600)
RC slab design (AS3600)
Tilt-up wall panel design (AS3600)
Updated in accordance with AS 3600-2018 and incorporating Amendments No. 1

Other Updates

RC 2D/beam analysis & design (AS3600)
RC beam design (AS3600)

[TEDDS-599]1 - Added option to convert beam model to a 2D model.
[TEDDS-3717/3897]1 - Improved the 2D analysis validation message when an model has beams in that are beyond scope of the calculation.

Back to top

Canada

Updates

Batch design

[TEDDS-4440]1 Enhanced to include an option for showing a message box prompt when either each design has finished or the entire batch design has finished. While the message window is open it is possible to view the contents of the Tedds progress log window.
[TEDDS-4441]1 Enhanced to include an option to run any list of expressions before the input for each row is assigned so that other variables or functions can be used to setup each design case.
Moved the less frequently used options under the heading "Advanced Options" so that first time users are not overwhelmed by the options available.

Back to top

Europe

Precast concrete grouted sleeve splice design (EN1992)

New calculation which checks the design of a precast grouted sleeve splice connection. A column to column, column to foundation or beam to column joint can be defined. In accordance with EN1992 and the national annex for the UK, Ireland, Singapore, Malaysia, Finland, Norway, Sweden or the recommended Eurocode values.

Crane gantry girder design (EN1993)

Enhanced to allow for designs using flat bar rails. Output enhanced to include the results for the factored and unfactored end reactions.

Other updates

Batch design

Enhanced to include an example for "Precast concrete grouted sleeve splice design (EN1992)".
[TEDDS-4440]1 Enhanced to include an option for showing a message box prompt when either each design has finished or the entire batch design has finished. While the message window is open it is possible to view the contents of the Tedds progress log window.
[TEDDS-4441]1 Enhanced to include an option to run any list of expressions before the input for each row is assigned so that other variables or functions can be used to setup each design case.
Moved the less frequently used options under the heading "Advanced Options" so that first time users are not overwhelmed by the options available.

Column base plate design (EN1993)

[TEDDS-4332]1 - Updated calculation to select the correct default sections when the Tedds country setting is Finland, Norway or Sweden.

Pile analysis (EN1997)

[TEDDS-3964]1 - Updated calculation to select the correct default sections when the Tedds country setting is Finland, Norway or Sweden.

RC beam design (EN1992)
RC 2D/beam analysis & design (EN1992)

[TEDDS-3849]1 - Fixed reinforcement sketch for cantilever and short span cases.
[TEDDS-4283]1 - Fixed interface layout issue when the crack width check turned off and the calculation is rerun.

RC column design (EN1992)

[TEDDS-3832]1 Enhanced to include check for shear resistance of the section without shear reinforcement.

RC slab design (EN1992)

[TEDDS-309]1 Fixed undefined variable error when rerunning calculation and clicking on the support reinforcement dialog.

Steel column design (EN1993)

[TEDDS-3842]1 - Updated calculation to select the correct default sections when the Tedds country setting is Finland, Norway or Sweden.

Steel member design (EN1993)
Steel 2D/member analysis & design (EN1993)

[TEDDS-4403]1 - Corrected undefined variable 'Ix' error associated with changing selected section in design interface.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Back to top
Was this helpful?