Tekla Tedds Engineering Library (December 2020)

Last updated January 13, 2021 by Tedds Development Team tekla-product-development-tedds-team-ug@trimble.com

Tekla Tedds Engineering Library (December 2020)


UK and Asia

Wind loading (EN1991)

Enhanced to include support for the National Annex of Singapore.

Other updates

Masonry bearing design (EN1996)

[TEDDS-5056]1 - Fixed hef being used in initial eccentricity of vertical loading.

Masonry column design (EN1996)

[TEDDS-4345]1 - Fixed divide by zero error with small vertical loads.
Enhanced to include the option to omit vertical loading check when design small vertical loads.

Precast concrete beam design (EN1992)

[TSD-8247]1 - Added the ability to omit the web/flange longitudinal shear check by setting the change in moment to 0kNm or length under consideration to 0mm.

RC beam design (EN1992)

[TEDDS-5016]1 - Enhanced to include the option to include a results summary table in the output.

Timber member design (EN1995)
Timber stud design (EN1995)
Timber rafter design (EN1995)
Timber joist design (EN1995)

[TEDDS-5126]1 Fixed 'updateLockedSection' error when modifying the section for a rafter, stud or joist element.

USA

Updates

RC beam design (ACI318)
RC beam analysis & design (ACI318)
RC 2D analysis & design (ACI318)

[TEDDS-4981]1 - Corrected the output statement when using the minimum exception rule and a negative moment occurs.

[TEDDS-5016]1 - Enhanced to include the option to include a results summary table in the output.

Europe

Updates

Precast concrete beam design (EN1992)

[TSD-8247]1 Added the ability to omit the web/flange longitudinal shear check by setting the change in moment to 0kNm or length under consideration to 0mm.

RC beam design (EN1992)

[TEDDS-5016]1 - Enhanced to include the option to include a results summary table in the output.

Timber member design (EN1995)
Timber stud design (EN1995)
Timber rafter design (EN1995)
Timber joist design (EN1995)

[TEDDS-5126]1 Fixed 'updateLockedSection' error when modifying the section for a rafter, stud or joist element.

Australia

Updates

RC beam design (AS3600)

[TEDDS-5016]1 - Enhanced to include the option to include a results summary table in the output.

Canada

Updates

2D Analysis

[TEDDS-3770]1 Fixed Inertia values not being populated when selecting a Pipe section from the Canadian data list.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Content rating: 
No votes yet