Tekla Tedds Engineering Library (April 2021)

Last updated April 22, 2021 by Tedds Development Team tekla-product-development-tedds-team-ug@trimble.com

Tekla Tedds Engineering Library (April 2021)


UK and Asia

2D analysis - Frame Wizard
2D analysis - Truss Wizard

[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (EN1993) calculation.

Bolt group analysis

[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.

Column base plate design (EN1993)

[TEDDS-5513]1 - Fixed illegal mathematical relationship.
[TEDDS-5535]1 - Fixed weld length for CHS shear check

RC corbel design (EN1992)

[TEDDS-5495]1 - Removed maximum distance to vertical force limitation.
Removed maximum corbel width limitation.
Enhanced so corbel width defaults to the minimum allowable value.
Refactored input variable limitations so values are not reset automatically

RC wall design (EN1992)

[TEDDS-5615]1 - Fixed incorrect argument error immediately after calculating a new document.

Steel column design (EN1993)

[TEDDS-5565]1 - Fixed incorrect argument in function for system variable 'output_summary_table'.

Steel to concrete simple connection design (EN1993)

[TEDDS-5556]1 - Fixed illegible sketch when punching shear perimeter is shown.

USA

2D analysis - Frame Wizard
2D analysis - Truss Wizard

[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (AISC360) calculation.

Bolt group analysis

[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.

RC 2D analysis & design (ACI318)
RC beam analysis & design (ACI318)
RC beam design (ACI318)

[TEDDS-5435]1 - Fixed an error in the zone reinf. details dialog where the reinforcement details couldn't be changed when designing a beam as a short span.
[TEDDS-5438]1 - Fixed a missing pass/fail status for top reinforcement when designing a beam as a short span.
[TEDDS-5456]1 - Fixed a pass/fail status message when using user defined areas and depths in the design only calculation.

Wood beam analysis & design (NDS)

[TEDDS-3772]1 - Corrected deflection check results for beams with negative deflection reported.

Wood ledger design (NDS)

[TEDDS-5453]1 - Revise calculation of load duration factors for load combinations including seismic and/or rain loads

Wood member analysis & design (NDS)
Wood 2D analysis & design (NDS)

[TEDDS-5603]1 - Corrected expression error, undefined variable 'Temperature'.

Wood shear wall design (NDS)

[TEDDS-5533]1 - Fixed '_LibXUX' undefined variable error.

Europe

2D analysis - Frame Wizard
2D analysis - Truss Wizard

[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (EN1993) calculation.

Bolt group analysis

[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.

Column base plate design (EN1993)

[TEDDS-5513]1 - Fixed illegal mathematical relationship.
[TEDDS-5535]1 - Fixed weld length for CHS shear check

RC corbel design (EN1992)

[TEDDS-5495]1 - Removed maximum distance to vertical force limitation.
Removed maximum corbel width limitation.
Enhanced so corbel width defaults to the minimum allowable value.
Refactored input variable limitations so values are not reset automatically

RC wall design (EN1992)

[TEDDS-5615]1 - Fixed incorrect argument error immediately after calculating a new document.

Steel column design (EN1993)

[TEDDS-5565]1 - Fixed incorrect argument in function for system variable 'output_summary_table'.

Steel to concrete simple connection design (EN1993)

[TEDDS-5556]1 - Fixed illegible sketch when punching shear perimeter is shown.

Australia

2D analysis - Frame Wizard
2D analysis - Truss Wizard

[TEDDS-5602]1 - Fixed error "The Calc Item 'Init dlist steel section …' does not exist" when using the frame or truss wizard from the Steel 2D analysis & design (AS4100) calculation.

Bolt group analysis

[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.

Canada

Bolt group analysis

[TEDDS-5590]1 - Fixed undefined variable '_bga.Sketch' error if output options dialog is not opened before finishing calculation.
[TEDDS-5593]1 - Refactored calculation to combine SI and US unit versions into a single calculation.

Footnotes

1 This number is an internal reference number and can be quoted to your local Support Department should further information on an item be required.

Content rating: 
Average page rating: 5 (1 vote)
Refresh page after voting to show updated result.